NC Cardinal Support and Staff Education
  • Home
  • Submit a Request
  • Check on a Request
  • Knowledge Books
    • About NC Cardinal
    • Acquisitions in Evergreen
    • Administration Manual for Libraries
    • Cataloging in NC Cardinal
    • Circulation in Evergreen
    • Evergreen Upgrades
    • Libraries Migrating into NC Cardinal
    • Serials in Evergreen
    • Offline Transactions
    • Reports in Evergreen
    • Resource Sharing
    • Student Access Initiative
    • Summon Documentation
    • Troubleshooting in Evergreen
Powered by HelpSpot

Home → Acquisitions in Evergreen → Selection Lists and Purchase Orders → Purchase Orders

2.2. Purchase Orders


Purchase Orders

 

Purchase Orders allow you to keep track of orders and, if EDI is enabled, communicate with your provider. To view purchase orders, click Acquisitions → Purchase Orders.

Naming your purchase order

You can give your purchase order a name. Some vendors have a character limit on identifiers for purchase orders submitted via EDI, where the identifier includes not only the name assigned by the cataloger but also the line item ID (number) and the PO ID (number). The identifier for each line item in the purchase order looks like this: 

<PO ID><name>/<lineitem ID>

The PO ID number is assigned by Evergreen in sequence and the current number of digits for NC Cardinal is 6, and will soon be 7. The line item ID number is assigned by Evergreen and is currently 6 digits, but will also soon be 7 digits. There is also a forward slash that takes one character, which totals 15 occupied spaces.

As an example of how that affects naming: Ingram will not allow a total identifier longer than 22 characters.  So, a cataloger who will be submitting their PO via EDI will need to limit any name they assign to 7 or fewer characters for Ingram.

Note: Catalogers should check with each of their EDI vendors to see what the character limit is for that particular vendor and adjust the number of characters used for the optional PO name accordingly. Creating a name longer than the vendors character limit will cause problems with invoices such that the invoices will likely attach to a different PO altogether, causing headaches for all concerned.

When creating a purchase order or editing an existing purchase order, the purchase order name must be unique for the ordering agency. Purchase Order Names are case sensitive. Evergreen will display a warning dialog to users, if they attempt to create or edit purchase order names that match the names of already existing purchase orders at the same ordering agency. The Duplicate Purchase Order Name Warning Dialog includes a link that will open the matching purchase order in a new tab.

 

Duplicate PO Name Detection When Creating a New Purchase Order

PO Name Detection 1

When a duplicate purchase order name is detected during the creation of a new purchase order, the user may:

  • Click View PO to view the purchase order with the matching name. The purchase order will open in a new tab.
  • Click Cancel to cancel the creation of the new purchase order.
  • Within the Name (optional) field, enter a different, unique name for the new purchase order.

If the purchase order name is unique for the ordering agency, the user will continue filling in the remaining fields and click Save.

If the purchase order name is not unique for the ordering agency, the Save button will remain grayed out to the user until the purchase order is given a unique name.

Duplicate PO Name Detection When Editing the Name of an Existing Purchase Order

To change the name of an existing purchase order:

  1. Within the purchase order, the Name of the purchase order is a link (located at the top left-hand side of the purchase order). Click the PO Name.
  2. A new window will open, where users can rename the purchase order.
  3. Enter the new purchase order name.
  4. Click OK.
PO Name Detection 2

If the new purchase order name is unique for the ordering agency, the purchase order will be updated to reflect the new name. If the purchase order name is not unique for the ordering agency, the purchase order will not be updated with the new name. Instead, the user will see the Duplicate Purchase Order Name Warning Dialog within the purchase order.

PO Name Detection 3

When a duplicate purchase order name is detected during the renaming of an existing purchase order, the user may:

  • Click View PO to view the purchase order with the matching name. The purchase order will open in a new tab.
  • Repeat the steps to change the name of an existing purchase order and make the name unique.

 

Activating your purchase order

When the appropriate criteria have been met the Activate Order button will appear and you can proceed with the following:

  1. Click the button Activate Order.
  2. When you activate the order the bibliographic records and copies will be imported into the catalogue using the Vandelay interface, if not previously imported. See How to Load Bibliographic Records and Items into the Catalogue for instructions on using the Vandelay interface.
  3. The funds associated with the purchases will be encumbered.

After you click Activate Order, you will be presented with the record import interface for records that are not already in the catalog. Once you complete entering in the parameters for the record import interface, the progress screen will appear. As of Evergreen 2.9, this progress screen consists of a progress bar in the foreground, and a tally of the following in the background of the bottom-left corner:

  • Lineitems processed
  • Vandelay Records processed
  • Bib Records Merged/Imported
  • ACQ Copies Processed
  • Debits Encumbered
  • Real Copies Processed

Activate Purchase Order without loading items

It is possible to activate a purchase order without loading items. Once the purchase order has been activated without loading items, it is not possible to load the items. This feature should only be used in situations where the copies have already been added to the catalogue, such as:

  • Cleaning up pre-acquisitions backlog
  • Direct purchases that have already been catalogued

To use this feature, click the Activate Without Loading Items button.

Activate Purchase Order with Zero Copies

By default, a purchase order cannot be activated if a line item on the purchase order has zero copies. To activate a purchase order with line items that have zero copies, check the box Allow activation with zero-copy lineitems.

Zero_Copies1
 

Troubleshooting Purchase Orders that will not Activate

Check to see that all items have required fields assigned or the library has library settings in place to define those fields. Required fields are:

Barcode (may be supplied by library setting)
Call Number (may be supplied by library setting)
Circ Modifier (may be supplied by library setting)
Copy Location (shelving location; may be supplied by library setting)
Fund Code
Owning Library
Quantity

Check to see if items are linked to deleted bibliographic records:

Purchase Orders that carry items linked to deleted bibliographic records will cause the order not to activate. The use of deleted bibliographic records in purchase orders has been an issue for a long time, as it is hard to know if your purchase order is connected to a deleted bibliographic record without database access. Without database access, staff must access the purchase order and click on each "Catalog" link below each line item to discover whether or not the bibliographic record is deleted. The reason this happens is timing. The purchase order is created and line items are added. The line items either create new bibliographic records or attach to existing records. Then, later, someone deletes one of the bibs. Now, we have a PO with a line item connected to a deleted bib. Evergreen is blind to this and when you click "Activate Order"  it will break silently on the server with no feedback to the user. 

 

Given that there are hundreds of catalogers working on any given week, the NC Cardinal catalog is an ever-changing organism and it is sometimes necessary to double-check for changes that may have occurred between the time that a PO was created and activated. As part of your acquisitions workflow, particularly if there has been a gap of time between the date/time the purchase order was created or items were added and the time a cataloger is attempting to activate the purchase order, we recommend checking to see if the PO will not activate because one or more of the bib records are deleted. If so, a cataloger should do a thorough search of the catalog to see if there are existing, undeleted records that match the items currently on a deleted record and transfer items to that undeleted record. If there is not an undeleted matching record, please be aware that undeleting a bib record can have an unexpected impact on the OPAC visibility of the bib record and attached on order items. Please do an OPAC (not staff client) search to see if the bib and items are visible in the catalog. If not, please submit a help ticket.

 

Check to see if line items are linked to the catalog:
 
Every one of the line items on a PO have to be linked to a bib in the catalog, otherwise you will be unable activate the PO. This line item is already linked to the catalog:
Items already linked to the catalog have a hyperlink named "catalog" next to the line item number.
 
While this line item is not linked:
 
Items that are not yet linked to the catalog have a hyperlink named "link to catalog" next to the line item number.
 
In order to create the necessary link to a new bib, click on the "link to catalog" text. Then, in the new tab, click on Search. If a bib comes up, verify that it matches the ordered item and click Select. If no bib comes up, you will need to either add the bib using z39.50 or take that line item off your PO and reorder in a different PO. If uploading the bib record from the vendor site, ensure that you are following the instructions on the Load MARC Order Record page.

Knowledge Tags
purchase orders  /  troubleshooting  /  EDI  / 

This page was: Helpful | Not Helpful